Table of Contents
Advertisement
Analysis: Process to the gel analysis software.
13.
Blue Light: ON/OFF switch for the Blue light.
14.
White Light: ON/OFF switch for the White light.
15.
White Light Table: ON/OFF switch for the White light table.
16.
UV: ON/OFF switch for the UV transilluminator
17.
UV Intensity: Change the UV light intensity between 70% and
18.
or
Time Set:
Reduce: Decrease the exposure time of camera.
19.
Exposure Time: Manually input the exposure time (range: 0.01-
20.
Note:
It is recommended not to set the exposure time above 5
seconds in normal usage. Overexposure tends to affect the
clarity of image, in addition resulting in slight UV tubes
exposed in the image.
Increase: Increase the exposure time of camera.
21.
100% illumination.
30 sec) to adjust.
29
Advertisement
Table of Contents
