Table of Contents
Advertisement
Section 3 Installation Instructions
SmartView Pro Imager System comes with epi white light and trans-UV as
standard. Optional blue light module or white light table is offered for
expansion to offer higher flexibility. There are few procedures to install the
optional devices: place the unit on a sturdy, level safe and dry place, then
follow the instruction below for installation.
Note: Please skip ahead to section 3.3 if no optional lighting modules are
included with your purchase.
Tool Required: 7M/M Socket wrench (not provided)
3.1 Installing Blue Light Module (Optional)
Step1 Get the blue light module ready. There are two blue lights (left and right)
and 2 pieces of M7 nuts in the package.
M7 nuts
14
Advertisement
Table of Contents
