Step1 Add Lane: Selecting your lane by creating a long rectangular box
along the lane. Press Add Lane button (as box 1) and then hold and
drag the rectangular box to the area you want. Each time you press
Add Lane button, the system will duplicate an exact box as your
previous box. You may move the box once the
appeared, hold and drag the box to the appropriate location.
1
Step2 Delete Lane: Press Del Lane button (as box 1), and then click the
center of rectangular box you want to delete. After selecting all lanes,
click Next Step button (as box 2) to move forward.
Note: Make sure your bands are straight and enclosed inside the rectangular
box. You must choose at least one lane in order for the analysis
software to proceed.
59
cursor is