Language Configuration - Konica Minolta Magicolor 2350 EN Reference Manual

as the job sent to the printer. If the PERSONALITY variable is set to
AUTO, and no ENTER command is received, Context Language Selec-
tion (described next) is used instead of Implicit Language Selection. This
variable can be set through PJL or user interface (operator control panel
[System Default/Emulations/Default menu], CrownView, and PageScope
Light).
Context Language Selection—When the printer is configured to auto-
matically select the language of incoming jobs and the ENTER LAN-
GUAGE command is not used to identify the job language, the printer
samples the incoming data and chooses a language based on its interpre-
tation of the sampled data.
14

Language Configuration