Konica Minolta Magicolor 2350 EN Reference Manual page 30

Command
Syntax @PJL INITIALIZE
Description This command is used to reset the PJL variables to their
Notes To reset the PJL variables to the User Default values, use
Command
Syntax @PJL INQUIRE [LPARM : personality] variable
Response
Syntax
Description This command requests the current value of a PJL
Notes A question mark (?) is returned if the printer doesn't support
26
INITIALIZE
factory settings.
the DEFAULT command instead of the INITIALIZE
command.
INQUIRE
[<CR>]<LF>
@PJL INQUIRE [LPARM: personality] variable
<CR><LF>
value <CR><LF>
<FF>
variable.
LPARM is used to request status on a particular
language-specific variable, such as PCL fonts.
the variable specified in the INQUIRE command line.
The @PJL INFO VARIABLES command returns the status
of all variables.
Commands