Pjl Command Syntax - Konica Minolta Magicolor 2350 EN Reference Manual

PJL Command Syntax

The characters and symbols used when identifying the syntax of PJL com-
mands is defined in the following table:
[ ]
< >
|
CAPS
Control Character Definitions
This table defines the control characters used in PJL command syntax.
Control Character
Char- Descrip-
acter tion
<CR> Carriage
Return
<ESC> Escape
<FF> Form Feed 0x0C
<HT> Horizontal
Tab
<LF> Line Feed 0x0A
<SP> Space
<UEL> * Universal
Exit
Language
Notes: *See "Universal Exit Language (<UEL>) Usage" on page 12 for complete
UEL usage information.
PJL Command Syntax
Square brackets enclose any optional arguments that
can be used in conjunction with the command. If you use
optional arguments, don't type the brackets.
Angled brackets enclose control characters. When these
appear in the Syntax, enter the control code only (don't
type the <> characters). See the next section for control
character definitions.
Vertical bars appear in command syntax to indicate that
there are multiple optional parameters.
The complete @PJL command must be in uppercase.
Hex Code
0x0D
0x1B
0x09
0x20
0x1B 25 2D 31 32 33 34 35 58 27 37 45 49 50 51 52 53 88
ASCII Code
13
27
12
9
10
32
11