Konica Minolta Magicolor 2350 EN Reference Manual page 31

Command
Syntax @PJL JOB [NAME = " job name"][START= first
Description The JOB command signifies the beginning of a new PJL
Notes The default settings for the optional parameters shown in
Command
Syntax @PJL
Description This command signals the printer to use its PJL parser to
Notes This command must always immediately follow the <UEL>
Command
Syntax @PJL RESET
Description Resets the command settings to the User default settings.
Notes The SET and RESET commands affect only the current
Commands
JOB
page][END = last page][PASSWORD = number ]
[DISPLAY = " display text"][<CR>]<LF>
subjob to the printer. This command should be used with
the EOJ command to frame the PJL job to prevent multiple
PJL subjobs from being treated as one job.
the Syntax are
NAME= N/A
START=1
END= All pages
PASSWORD=0
DISPLAY= N/A
The use of these parameters is optional.
Always use the JOB command with the EOJ command.
PJL
interpret the following command lines.
command (with no white space between these two
commands).
RESET
job.
27