Variable
Choices/
Range
Default 15
Description Sets the time interval that the printer waits to receive data
Variable
Choices/
Range
Default ON
Description Enables or disables tray chaining. When ON is selected,
Variable
Choices/
Range
Default ON
Description Sets tray mapping to enabled (ON) or disabled (OFF).
Notes Only supported with optional lower feeder unit and Tray 2.
56
TIMEOUT
0-999
(seconds)
for the current print job. If the wait time exceeds the value
set, the job ends and the printer is ready to accept other
jobs.
0 = no time out.
TRAYCHAIN
OFF
ON
the printer uses an alternate media tray as the media
source when the primary tray is empty.
Tray chaining occurs only if the alternate tray has the
correct media size and type installed.
TRAYMAPPING
OFF
ON
Environmental Variables