Konica Minolta Magicolor 2350 EN Reference Manual page 29

Command
Syntax @PJL INFO category [<CR>]<LF>
Description This command is used to request information from the
Notes Use just one category per INFO command line. If the printer
Commands
INFO
printer. The category is the component that you want infor-
mation about. The following items are the categories that
your printer supports in response to the INFO command:
ID—returns the printer model number.
CONFIG—provides the current printer hardware configura-
tion.
MEMORY—provides the current amount of free memory
space available to the printer.
PAGECOUNT—returns the total number of pages that the
printer has printed.
STATUS—returns the current status of the printer. See
Chapter 2.2 "Status Codes" beginning on page 59 for a list
of the status codes returned by your printer.
VARIABLES—provides all supported variables and the
values that each variable supports.
USTATUS—returns the unsolicited status variables (vari-
ables that automatically send status whenever their status
changes), their optional values, and their current values.
See Chapter 2.2 "Status Codes" beginning on page 59 for a
list of the status codes returned by your printer.
doesn't support a category specified in the INFO command
line, the response will be a question mark (?).
Items that are not supported by the printer's current
configuration are not listed in the printer's configuration
response for information (@PJL INFO CONFIG). For
example, if the duplex unit isn't installed, the duplex options
don't appear in configuration query results.
25