State; Fcc Id; Gtx - Javad HPT901BT User Manual

Command Line Interface
Identification and Diagnostics Commands
Firmware =2.2.32
BootLoader =4.03

4.2. STATE

The STA TE command is used to check the state of the wireless link.
STA TE [Parameter Name][/?]
Parameter Name
Region
Tx
Rx
T
The STA TE command without Parameter Name indicates all values:
Region =1
Tx =915000000
Rx =915000000
T=46.00
4.3. IC
The IC command prints string:
IC: 3504A-FH915
@00

4.4. FCC ID

The FCC ID command prints string:
FCC ID: WJ4FH915
@00

4.5. GTX

The GTX command allows get from port the Number of transmitted bytes.
GTX [Parameters List]
Parameter List
0
30
0-EU; 1-USA; 2-Australia
Displays the initial frequency of the transmitter
Displays the initial frequency of the receiver
-30°C to 100°C – Displays the temperature inside of enclosure
0 – Disable send to port the Number of the transmitted bytes (a default setting).
Short Description
Short Description
www.javad.com