Dcrc; Dlng; Dsrv - Javad HPT901BT User Manual

Command Line Interface
Modem Commands
The LSRT command without Parameter prints Link Symbol Rate parameter.

2.9. DCRC

The DCRC ("Data CRC") command is manage the output of the received data to the port.
DCRC [Parameters List]
Parameter List
0
1
The DCRC command without Parameter prints DCRC parameter.

2.10. DLNG

The DLNG ("Data Subpackage Length") command enables the validation of the receipted parameter -
length of subpackage.
DLNG [Parameters List]
Parameter List
0
1
The DLNG command without parameter prints DLNG parameter.

2.11. DSRV

The DSRV ("Data Service") command allows the transmitter to control the tuning of the receiver. When
DSRV = 1 the receiver settings - FEC, SCRAM, TRFC - transmitted from the transmitter to the receiver
through the air.
DSRV [Parameters List]
Parameter List
0
1
The DSRV command without parameter prints DSRV parameter.
26
0 - received data are distributed to the port,
regardless of the received data CRC. (a default setting)
1 - data are distributed to the port only if the CRC is correct.
0 - validation of the receipted parameter length subpackage is not used.
(a default setting)
1 - validation of the parameter is used
0 - the receiver's parameters are set from the configuration file. (a default setting)
1 – FEC, SCRAM, TRFC are set from service data passed to the receiver through the air.
Short Description
Short Description
Short Description
www.javad.com