Rgn; Trfc; Lsrt - Javad HPT901BT User Manual

2.6. RGN

The RGN command is also responsible for configuring radio's operation mode.
RGN [Parameters List]
Parameter List
0
1
2
The RGN command without parameter prints the Region number.

2.7. TRFC

The TRFC command is also responsible for configuring radio's operation mode.
TRFC [Parameters List]
Parameter List
0
1
2
If the TRFC=1 each Data Packet is transmitted twice: first time on the current time and frequency, second
time on the next time and frequency position.
If TRFC=2 ("Transparent mode" On) two modems implement a "full duplex" - duplex transmission
mode in which data transfer maintained "simultaneously" with the reception of data

2.8. LSRT

The LSRT command is specific for USA and AUS region. It changes Link Simbol Rate.
LSRT [Parameters List]
Parameter List
0
1
2
3
www.javad.com
Sets EUR region
Sets USA region (a default setting)
Sets AUS region
0 – Disable Packet repeating
1 – Enable Packet repeating (a default setting)
2 - Transparent mode
64000 kHz (a default setting)
32000 kHz
16000 kHz
8000 kHz
Short Description
Short Description
Short Description
Command Line Interface
Modem Commands
.
25