Smart Settings - HIKVISION DS-KD9633-WBE6 User Manual

Video Intercom Face Recognition Door Station User Manual
Note
Up to 4 elevator controllers can be connected to one door station.
●
Up to 10 negative floors can be added.
●
Make sure the interface types of elevator controllers, which are connected to
●
the same door station are consistent.
RS-485 Settings
Set the working mode to linked device.
Steps
1. Click Access Control → RS-485 to enter the settings page.
2. Select the No.
3. Select the working mode.
4. Click Save to enable the settings.

9.4.9 Smart Settings

Biometrics Settings
Adjust the face recognition parameters and fingerprint parameters according to your
needs.
Steps
1. Click Smart to enter the settings page.
2. Enable face anti-spoofing to edit face capture advanced parameters.
Figure 9-23 RS-485 Settings
81