● Products described in this Document, which may include licenses obtained from third parties. Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission.
Page 3
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ● RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS;...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Safety Instruction Warning All the electronic operation should be strictly compliance with the electrical safety regulations, ● fire prevention regulations and other related regulations in your local region. Please use the power adapter, which is provided by normal company. The power consumption ●...
Page 6
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Improper use or replacement of the battery may result in hazard of explosion. Replace with the ● same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Regulatory Information EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed...
Page 8
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Contents Chapter 1 About this Manual ...................... 1 Chapter 2 Appearance ........................ 2 Chapter 3 Terminal and Wiring Description ................. 6 3.1 Terminal Description ......................6 3.2 Wiring Description ......................... 7 3.2.1 Door Lock Wiring ......................
Page 10
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 6.3.2 Unlock by Presenting Card ..................20 6.3.3 Unlock by Fingerprint ....................21 6.3.4 Unlock by Face ......................21 Chapter 7 Quick Operation via Web Browser ................22 7.1 Select Language ........................22 7.2 Time Settings ........................
Page 11
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 8.7.12 Video Intercom Settings .................... 46 8.7.13 Set Card Security ....................... 48 8.7.14 Set Privacy Parameters ....................49 8.7.15 Set Biometric Parameters ..................50 8.7.16 Customize Audio Content ..................52 8.8 Maintenance and Security ....................
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Chapter 1 About this Manual Get the manual and related software from or the official website (http://www.hikvision.com). Product Model Door Station DS-KD9203 Series Scan the QR code to get the User Manual for detailed information.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Chapter 2 Appearance Door Station without Fingerprint Module Figure 2-1 Appearance of Door Station without Fingerprint Module...
Page 14
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Table 2-1 Description Description Camera IR Supplement Light Screen Loudspeaker Buttons Microphone Card Reading Area TAMPER...
Page 15
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Door Station with Fingerprint Module Figure 2-2 Appearance of Door Station with Fingerprint Module Table 2-2 Description Description Camera IR Supplement Light Screen Loudspeaker...
Page 16
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Description Buttons Microphone Card Reading Area/ Fingerprint Recognition Module TAMPER...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Chapter 3 Terminal and Wiring Description 3.1 Terminal Description Figure 3-1 Terminal Description Table 3-1 Description Name Terminal Description Network Interface Network Signal Input ALARM IN SEN1 Door Contact Input 1...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Name Terminal Description Door Lock Relay Output 1(Normally Open) Grounding Door Lock Relay Output 2(Normally Close) COM2 Common Interface 2 Door Lock Relay Output 2(Normally Open) Grounding Power Supply DC 12 V...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Note Terminal NC1/COM1 is set as default for accessing electric bolt. Terminal NO1/COM1 is set as ● default for accessing electric strike. To connect electric lock in terminal NO2/COM2/NC2, it is required to set the output of terminal ●...
Page 20
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 3-4 Door Contact Wiring...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Chapter 4 Installation Note Make sure the device in the package is in good condition and all the assembly parts are included. ● The power supply the door station supports is 12 VDC. Please make sure your power supply ●...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 4.1 Gang Box Figure 4-1 Dimension of the Gang Box Note The dimension of the gang box is 364 mm (W) × 118 mm (H) × 40 mm (D). ●...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 4.2 Flush Mounting with Gang Box Steps 1. Cave an installation hole in the wall. Pull the cable out from the wall. Note The suggested dimension of the installation hole is 364.3 mm (W) × 118.6 mm (H) × 40.2 mm ●...
Page 24
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 4-2 Flush Mounting with Gang Box...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Chapter 5 Activation 5.1 Activate Device Locally You are required to activate the device first by settings a strong password for it before you can use the device. Steps 1. Power on the device to enter the activation page automatically.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 4. After selection, press # to finish activation. 5.2 Activate Device via Client Software You can only configure and operate the door station after creating a password for the device activation.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 5.3 Activate via Web Browser You can activate the device via the web browser. Steps 1. Enter the device default IP address (192.0.0.65) in the address bar of the web browser, and press Enter.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Chapter 6 Local Operation 6.1 Local Configuration When entering configuration page, the button is used as follows. Table 6-1 Button Description Button Description Button Description Previous Next Exit/Back 6.1.1 Edit Network Parameters After activating, you should edit the network parameters.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Door Station Settings Edit the parameters of the door station (including but not limited to, community No., building No., floor No., room No. and device mode). Steps 1. Configure the parameters according to the actual needs.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Add Users You can add cards, permissions and room No. for the users. Steps 1. Select +Add, and press # to enter the adding page. 2. Edit the room No.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Enter 【Community No. + Building No. + # + Unit No. + # + Room No.】 and press call button to call resident. Note When Unit No. is one, it can be omitted. When Unit No. is omitted, Community No. must be omitted at the same time.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 6.3.3 Unlock by Fingerprint Note Make sure you have added the fingerprint to the device. ● Fingerprint function may vary with different modules. Please refer to the actual devices. ●...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Chapter 7 Quick Operation via Web Browser 7.1 Select Language You can select a language for the device system. Click in the top right of the web page to enter the Device Language Settings page. You can select a language for the device system from the drop-down list.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Picture Uploading and Storage Save Picture When Auth. Save picture when authenticating automatically. Upload Picture When Auth. Upload the pictures when authenticating to the platform automatically. Save Registered Picture The registered face picture will be saved to the system if you enable the function.
Page 35
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Note If set the device type as Door Station, you can set theCommunity No., Building No., Unit No., ● Floor No. and Door Station No.. If set the device type as Outer Door Station, you can setOuter Door Station No. and ●...
Page 36
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Private Server IP Refers to the SIP server IP. Enter the main station’s IP address that used for communication. At this time the main station is used as a SIP server. Other intercom devices should registered to this server address to realize communication.
Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 8.3 Overview You can view the live video of the device, real-time event, linked devices, person information, network status, basic information, and device capacity. Figure 8-1 Overview Page Function Descriptions:...
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual The door status is open/closed/remaining open/remaining closed. Controlled Status You can select open/closed/remaining open/remaining closed status according to your actual needs. Real-Time Event You can view the event Employee ID, Name, Card No., Event Type, Time, and Operation. You can also click View More to enter the search conditions, including the event type, employee ID, the name, the card No., the time, the unit.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Add Face Picture Click Person Management → Add to enter the Add Person page. Click + on the right to upload a face picture from the local PC. Note The picture format should be JPG or JPEG or PNG, and the size should be less than 200 K.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-2 Device Management Add Device Click Add to add the indoor station or sub door station. Enter the parameters and click OK to ● add. Click Import. Enter the information of the device in the template to import devices in batch.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Refresh Click Refresh to get the device information. Optional: Set Device Information. Click to edit device information. ● Click to delete device information from the list. ● Select Status and Device Type to search devices.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. You should set the NTP server's IP address, port No., and interval.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual The password strength of the device can be automatically checked. In order to increase the ● security of your product, we highly recommend you change the password of your own choosing.
Page 45
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-4 TCP/IP Settings Set the parameters and click Save to save the settings. DHCP If disable the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, preferred DNS server and the Alternate DNS server.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual It refers to the port of real-time streaming protocol. Click Configuration → Network → Device Access → SDK Server . SDK Server It refers to the port through which the client adds the device.
Page 47
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-5 FTP Settings 2. EnableFTP. 3. Select Server Type. 4. Enter Server IP Address and Port. 5. Configure the FTP Settings, and the user name and password are required for the server login.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Set Network Penetration Service When the device is deployed on the LAN, penetration service can be enabled to achieve remote device management. Steps 1. Click Configuration → Network → Network Service → Network Penetration Service .
Page 49
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-6 Video Settings Page Set the stream type, the video type, the resolution, the Bit Rate type, the video quality, the frame rate, the Max. bitrate, the video encoding, and I Frame Interval.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Set the stream type, audio encoding, input volume, output volume, speak volume and audio sampling rate. Click Save to save the settings. 8.7.9 Set Image Parameters You can adjust the image parameters, video parameters, supplement parameters, backlight, beauty, image fusion and capture interval.
Page 51
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-8 Motion Detection 2. Enable Motion. 3. Drag the process bar to adjust the Sensitivity parameter. 4. Enable Notify Surveillance Center according to your actual needs. After enabled, the alarm information is uploaded to the surveillance center when an alarm event is detected.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-9 Linkage Settings 2. Select event. - Device Event Tampering Alarm - Door Event Door Open Timed Out (Door Contact) 3. Enable Notify Surveillance Center according to your actual needs. After enabled, the alarm information is uploaded to the surveillance center when an alarm event is detected.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-10 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No. Select the device corresponded door No. Door Name You can create a name for the door.
Page 54
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-11 Elevator Control 2. Select Elevator No. 3. Click to enable Elevator Control. 4. Set the elevator parameters. Elevator No. Select an elevator No. Main Elevator Controller Model Select an elevator controller.
Page 55
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Set RS-485 Parameters You can set the RS-485 parameters. Click Configuration → Access Control → RS-485 . Click Save to save the settings after the configuration. Set the RS-485 No.
Page 56
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Figure 8-12 Add Public Password Select password type. Enter and confirm the password. Enter remarks. Select electric lock. Click Save to save the settings. Set I/O Parameters You can set I/O Parameters.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Input 3 Select input 3 as Unlock. Input 4 Select input 4 as Unlock or Disable. 3. Set output parameters. Output 1 Output 1 is Electric Lock by default. Output 2 Select output 2 as Electric Lock or Disable.
Page 58
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Linked Network Settings Steps 1. Click Intercom → Video Intercom Network to enter the settings page. Figure 8-14 Session Settings 2. Set Registration Password. 3. Set Main Station IP and Video Intercom Server IP.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Note The Max. communication time range is 90 s to 1800 s. ● The Max. message duration range is 30 s to 60 s. ● Ringbacktone Settings Steps 1. Click Configuration → Intercom → Ringbacktone Settings to enter the settings page.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Set the parameters and click Save. Enable NFC Card Enable the function and you can present the NFC card to authenticate. In order to prevent the mobile phone from getting the data of the access control, you can disable NFC card to increase the security level of the data.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Save picture when authenticating automatically. Upload Picture When Authenticating Upload the pictures when authenticating to the platform automatically. Save Registered Picture The registered face picture will be saved to the system if you enable the function.
Page 62
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Face Recognition Timeout Value Set the timeout value when face recognizing.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Set the matching threshold when authenticating with face mask via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 8.8 Maintenance and Security 8.8.1 Upgrade and Maintenance Reboot device, restore device parameters, and upgrade device version. Reboot Device Click Maintenance and Security → Maintenance → Restart . Click Restart to reboot the device.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Advanced Settings Click Advanced Settings, and enter the admin password. Face Parameter Custom Anti-spoofing Detection Anti-spoofing Detection Level After enabling face anti-spoofing function, you can set the matching security level when performing live face authentication.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual 8.8.3 Log Query You can search and view the device logs. Go to Maintenance and Security → Maintenance → Log . Set the major and minor type of the log type. Set the start time and end time for searching, and click Search.
Page 67
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Note The function is only supported by certain device models. Create and Import HTTPS Certificate Steps 1. Go to Maintenance and Security → Security → Certificate Management . 2. In the HTTPS Certificate area, click Create Certificate Request.
Page 68
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Note The input certificate ID cannot be the same as the existing ones. 3. Upload a certificate file from the local. 4. Click Import.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Chapter 9 Other Platforms to Configure You can also configure the device via iVMS-4200 Client Software or HikCentral Access Control. For details, see the platforms' user manual. iVMS-4200 Client Software Click/tap the link to view the client software's user manual.
DS-KD9203 Series Video Intercom Face Recognition Door Station User Manual Appendix A. Appendix Tips When Collecting/Comparing Face Picture Keep your expression naturally when collecting or comparing face pictures. ● Do not wear hat, sunglasses, or other accessories that can affect the facial recognition function.
Need help?
Do you have a question about the DS-KD9203 Series and is the answer not in the manual?
Questions and answers