Flush Mounting With Gang Box - HIKVISION DS-KD9633-WBE6 User Manual

Video Intercom Face Recognition Door Station User Manual

4.2.3 Flush Mounting with Gang Box

Before You Start
The gang box for flush mounting of the door station with sub module is not
contained in the package. Please contact us for purchase need.
Steps
1. Cave an installation hole on the wall. Pull out the cable from the wall.
Note
The suggested dimension of the installation hole is 138.3 mm (W) × 335.7 mm
●
(H) × 41.3 mm (D).
The suggested length of the cables left outside is 250 mm.
●
2. Install the gang box into the wall.
1) Insert the gang box into the installation hole. Mark the position of the gang box
screw holes with a marker, and take out the gang box.
Figure 4-19 Cave Installation Hole
21