Network Settings - HIKVISION DS-KD9633-WBE6 User Manual

Video Intercom Face Recognition Door Station User Manual

9.4.3 Network Settings

TCP/IP Settings
TCP/IP settings must be properly configured before you operate the device over
network. The device supports IPv4.
Steps
1. Click Network → Basic Settings → TCP/IP to enter the settings page.
2. Select Network Card.
3. Configure the network parameters.
- Check DHCP, the device will get the parameters automatically.
- Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually.
4. Configure the DNS server.
5. Edit Alarm Center IP and Alarm Host Port.
6. Click Save to enable the settings.
Port Settings
Figure 9-7 TCP/IP Settings
65