Integrated Memory System; Resetting The Integrated Memory System; While Resetting Integrated Memory System; Seat Easy Access Operation - Hyundai Tucson 2023 Owner's Manual

Convenience Features
Resetting the Integrated
Memory System
1. Make sure that the gear is in P (Park)
and the engine is ON, and then open
the driver's door.
2. Adjust the driver's seat to the most
forward and upright positions.
3. Press and hold both the SET button
and the driver's seat movement
switch.
While Resetting Integrated
Memory System
A notification sound is heard and the seat
is adjusted to the most reward position.
Then the seat and seatback move to the
default center position.
The resetting procedure and the
notification sound may stop if:
The memory button is pressed.
The seat control switch is operated.
The gear is shifted out of P (Park).
The driving speed exceeds 2 mph
(3km/h).
The driver's door is closed.
Information
If the seat movement or notification
sound stops before the process
is complete, restart the resetting
procedure.
Before resetting the IMS, make sure
there are no objects on or around the
driver's seat.
5-18
Seat Easy Access Operation (if
equipped)
The system moves the driver's seat
automatically as follows:
Vehicles equipped with Driver's Power
Seat and Smart Key
- The driver's seat moves rearward
when the Button Start ignition
switch is pressed to turn the OFF
position.
- The driver's seat moves forward
when the Button Start ignition
switch is pressed to the ACC or
START position.
Seat Easy Access operation may be
limited when the driver's seat position
setting is already close to the maximum
rearward travel position.
You can enable or disable the Seat Easy
Access feature in the Settings menu in
the instrument cluster or infotainment
system on some models.
- User Settings > Convenience > Seat
Easy Access > Off/Normal/Extended
(for cluster type)
- Setup > Vehicle > Seat > Seat Easy
Access > Normal/Extended/Off (for
infotainment system type)
WARNING
To prevent injury or property damage, be
aware if there are objects or passengers
in the driver's side rear seat or seat
floor. To stop movement of the front
seat, press the SET button or any of the
driver's seat control switches.