Front Windshield Washers - Hyundai Tucson 2023 Owner's Manual

AUTO wiper control (if equipped)
The rain sensor located on the upper
end of the windshield glass senses
the amount of rainfall and controls the
interval of the wiping cycle.
To change the sensitivity setting, turn the
sensitivity control knob.
If the wiper switch is set in the AUTO
mode when the ignition switch is in the
ON position, the wiper operates once to
perform a self-check of the system. Set
the wiper to the OFF position when the
wiper is not used.
WARNING
To prevent personal injury:
Do not touch the upper end of the
windshield glass near the rain sensor.
Do not wipe the upper end of the
windshield glass with a damp or wet
cloth.
Do not put pressure on the windshield
glass.
NOTICE
To prevent damage:
When washing the vehicle, set the
wiper to the OFF position to stop the
auto wiper operation.
Do not remove the sensor cover
located on the upper end of the
passenger side windshield glass.

Front Windshield Washers

ONX4EH050002
In the OFF position, pull the lever gently
toward you to spray washer fluid on the
windshield and to run the wipers 1-3
cycles. The spray and wiper operation
continues until you release the lever. If
the washer does not work, you may need
to add washer fluid to the washer fluid
reservoir.
When the outside temperature is below
freezing, always warm the windshield
using the defroster to prevent the washer
fluid from freezing on the windshield and
obscuring your vision that could lead to
a collision resulting in serious injury or
death.
Always use appropriate washer fluids in
the winter season or cold weather.
NOTICE
To prevent damage:
Do not operate the washer when the
fluid reservoir is empty or when the
windshield is dry.
Do not attempt to move the wipers
manually.
WARNING
05
ONX4E050044
5-47