Table of Contents
Advertisement
DrIvEr CONTrOLS
POWEr WINDOWS AND AUTO UP / DOWN
TO OPEN / CLOSE THE WINDOWS
The main switches are located on the
driver's armrest.
• To open, depress the appropriate
window switch.
• To close, pull up on the appropriate
window switch.
AUTO UP / DOWN
(Front windows only)
The auto up / down feature is controlled by
the main switches.
• To fully open the window automatically,
press the AUTO switch fully down.
• To fully close the window automatically,
pull the AUTO switch fully up.
• To stop the window at any desired position
while the window is moving, pull up or down
then release the AUTO switch.
NOTE: Ignition switch must be ON.
WINDOW LOCK SWITCH
To disable the passenger front and rear power
windows, press the window lock switch. To
revert to normal operation, press the window
lock switch a second time.
CENTrAL DOOr LOCKS
The switch is located on the driver's and front
passenger's armrest.
To lock all doors:
Push down on the front
portion
of the switch.
A
To unlock all doors:
Push down on the rear
portion
of the switch.
B
AUTOMATIC DOOr LOCKING / UNLOCKING
Your Hyundai is equipped with a feature that
will automatically lock / unlock all the doors.
Lock:
When the selector lever is shifted out
of P (Park) position while the brake pedal
is depressed.
Unlock:
When the selector is shifted into
P (Park) position while the brake pedal
is depressed.
NOTE: If the key is in the ignition switch and
any front door is open, the doors will not lock.
4
A
B
OUTSIDE rEArvIEW MIrrOrS
The switch is located on the driver's
armrest and can be used to adjust both
the left and right outside mirrors.
TO ADjUST THE POSITION OF EITHEr
MIrrOr:
1.
Move the selecting switch
to
A
the R (right) or L (left) to adjust the
corresponding mirror.
2.
Adjust the mirror angle by depressing
the appropriate direction on the
perimeter switch.
3.
Move the selecting switch back to the
middle position to deactivate the
perimeter switch.
POWEr FOLDING
(if equipped)
Both left and right outside rearview
mirrors can be folded for parking in
narrow areas by pressing the outside
rearview mirror folding switch.
SET
1
2
ADjUSTABLE PEDALS
(if equipped)
Turn the ignition key to the ON position
with the selector lever in the Park (P)
position and push the switch.
Push the pedal position switch
to
move the pedals toward from you.
Push the pedal position switch
to
move the pedals away you.
A
IMS (INTEGrATED MEMOrY SYSTEM)
(if equipped)
The Integrated Memory System controls
are located on the driver's door trim.
MEMOrIzING DrIvEr POSITION
1.
Place the shift lever into Park (P)
while the ignition switch is ON.
2.
Adjust the driver's seat, outside
rearview mirrors and steering wheel
column (with electric tilt and telescopic
type) to the desired position.
3.
Push the SET button on the IMS
until the signal beeps.
4.
Within five seconds, push button
1 or 2 until the signal beeps twice.
The beep confirms that the positions
are memorized in the IMS.
TO ACTIvATE THE MEMOrIzED POSITION
1.
Place the shift lever into Park (P)
while the ignition switch is ON.
2.
When you push button 1 or 2, the
driving position will be automatically
adjusted to the position recorded for
that button. See Owner's Manual for
conditions in which IMS will not operate.
5
Advertisement
Table of Contents
