Surround View Monitor (Svm) - Hyundai Tucson 2023 Owner's Manual

The warning appears only when
Parking Distance Warning is on.
Surround View Monitor Auto On
With the ignition switch ON, go to Setup
> Vehicle > Driver Assistance > Parking
Safety > Surround View Monitor Auto
On (for infotainment system type) from
the Settings menu to use the function.
If Surround View Monitor Auto On
is selected, the front parking assist
view screen appears when the Parking
Distance Warning warns you while
driving in D (Drive).
Information
You can select Driving Safety Priority for
Surround View Monitor from the Settings
menu. For more information, refer to
the "Driver Assistance System Settings"
section in this chapter.
Surround View Monitor
Operation
Parking/View button
Type A
ONX4070040
Press the Parking/View button
on Surround View Monitor.
Press the button again to turn off the
function.
Type B
ONX4E070102
to turn
Front view
The front view appears on the screen
when the gear is in N (Neutral) or D
(Drive) to assist parking. The front view
has top view, front view, and side view.
View modes can be selected by pressing
the view buttons
View Monitor screen.
Turns on if:
You shift the gear from R (Reverse)
to N (Neutral) or D (Drive), and your
vehicle speed is below 9 mph (15
km/h).
You press the Parking/View button
when the gear is in N (Neutral) or
D (Drive) and your vehicle speed is
below 9 mph (15 km/h).
The Parking Distance Warning warns
you while driving in D (Drive).
(Surround View Monitor Auto On
must be selected from the Settings
menu.)
Information
When the front view is turned on, the last
view mode appears.
07
ONX4E070132
on the Surround
7-101