Configuration Tab; General Configuration; Home Automation (Wmp) System Configuration - HMS Intesis WMP User Manual

Home Automation (WMP) – Hitachi VRF
®
Intesis

4.2.2. Configuration tab

Select the Configuration tab to configure the connection parameters. Three subsets of information are shown in
this window: General (Gateway general parameters), WMP (Home Automation system) and Hitachi (Hitachi VRF
interface parameters).

4.2.3. General configuration

These are the general settings of the gateway. Here you can find:
•
General configuration
In this section you can include a name and description to identify the gateway.
•
Connection
Here are the settings related to the IP address (via DHCP/specific IP address) and the password set for the IP
configuration of the gateway in MAPS.
•
USB Host
In this section it is possible to configure the different settings for the USB host port.

4.2.4. Home Automation (WMP) system configuration

These are the settings available for the Home Automation system (WMP communication):
© HMS Industrial Networks S.L.U. - All rights reserved
This information is subject to change without notice
Figure 4.2 Intesis MAPS configuration tab
User Manual r1.1 EN
URL https://www.intesis.com
11 / 24