Table of Contents
Advertisement
When installing the inverter in a switch cabinet or similar closed environment, it
is necessary to make sure that the hot air that develops will be dissipated by
forced-air ventilation
If you wish to install the inverter on the outer walls of cattle stables, it is im-
portant to keep a minimum clearance of 2 m between all sides of the inverter
and air vents and other openings.
The place of installation should not be exposed to ammonia, corrosive gases,
salts, or acids.
Example: Install-
ation of several
inverters
Max. ambient temperatures:
-40°F to +122°F
(-40°C to +50°C)
Relative humidity:
0 - 100%
The air flow direction within
the inverter is from left to
top (cold air intake on the
left, hot air outflow at the
top).
The waste air can reach a
temperature of 70°C.
11
Advertisement
Table of Contents
