Network Service - Tenda O1 User Manual

8.6

Network service

8.6.1
DDNS
The DDNS function is only available in WISP or Router mode.
DDNS, dynamic domain name server, enables the dynamic DNS client on the device to deliver the
current WAN IP address to the DNS server. Then the server maps the WAN IP address to a domain
name for dynamic domain name resolution.
This function often works with the port forwarding, DMZ host, and remote web management
functions. Then users can visit an address with a domain name instead of a dynamic WAN IP
address, which makes the visit easier.
To access the page, choose Advanced > Network Service.
Configuration procedures:
Step 1 Start a web browser on the computer connected to the CPE, visit 192.168.2.1 and choose
Advanced > Network Service.
Step 2 Enable the DDNS function.
Step 3 Select a dynamic DNS provider from the drop-down list.
Step 4 Enter the user name, password, and domain name you registered with DDNS service
provider.
Step 5 Click Save on the bottom of this page.
155