Vlan Settings - Tenda O1 User Manual

6.5

VLAN settings

6.5.1
Overview
The device supports the IEEE 802.1Q VLAN function, so that it can be used in networks with
QVLAN. By default, the function is disabled.
6.5.2
Set up VLAN
Step 1 Start a web browser on the computer connected to the CPE, visit 192.168.2.1 and choose
Network > VLAN Settings to enter the configuration page.
Step 2 Enable the function.
Step 3 Set the parameters as needed.
Step 4 Click Save.
----End
Parameters description
Name
VLAN Settings
PVID
Management VLAN
WLAN VLAN ID
Description
It specifies whether to enable the VLAN function of this device. By default, it is
disabled. After the VLAN function is enabled, the PoE/LAN port is used as a trunk port.
It specifies the ID of the default native VLAN ID of the trunk port. The default ID is 1.
After the VLAN function is enabled, the PoE/LAN port is used as a trunk port.
It specifies the ID of the management VLAN of this device. The default ID is 1. After
changing the management VLAN, you can manage this device only after connecting
your computer to the new management VLAN.
It allows you to set a VLAN ID for the wireless network of this device. By default, it is
set to 1000.
After the VLAN function is enabled, the WLAN interface functions as an access port,
whose PVID is the same as VLAN ID.
96