Quick Setup - Tenda O1 User Manual

4

Quick setup

This module enables you to quickly configure the device or change the working mode of the CPE
to deploy your wireless network.
The CPE supports the following working modes:
AP: In this mode, the device creates a wireless network based on the current wired
−
network.
Client: In this mode, the device works as a wireless adapter to connect to the wireless
−
network of upstream AP.
Universal Repeater: In this mode, this device extends an existing wireless network for
−
broader network coverage.
WISP: In this mode, this device connects to a hotspot provided by ISP in wireless
−
manner, and provides the wireless network.
Repeater: In this mode, the device connects to multiple wired networks through
−
wireless bridge, and provides wireless access point.
P2MP: In this mode, the device connects to multiple wired networks through wireless
−
bridge, but does not provide wireless access point.
Router: In this mode, the device connects to a modem in wired manner, and provides a
−
wireless network.
22