P2Mp Mode - Tenda O1 User Manual

4.9

P2MP mode

In P2MP mode, this device connects 2 or more (this device supports 4 at most) wired networks
with a wireless link, but cannot be connected to wireless clients.
The configuration procedure of P2MP mode is similar with Repeater mode. In the following
example, the CPE works in P2MP mode, and bridges to four CPEs work in Repeater mode.
Application scenario
The CPE is used to combine two local networks into one in wireless manner. The network topology
is shown as below:
CPE1 in P2MP mode
Switch
Assume that the related parameters are shown as follows:
CPE1:
IP Address: 192.168.2.1
−
SSID: Tenda_1
−
Channel: 165
−
Security Mode: None
−
CPE2 in Repeater mode
Switch
CPE3 in Repeater mode
Switch
CPE4 in Repeater mode
CPE5 in Repeater mode
57