Diagnose - Tenda O1 User Manual

8.2

Diagnose

8.2.1
Overview
You can use the diagnosis tools for troubleshooting. The device supports the following tools:
Site Survey: used to check nearby wireless signals.
−
Ping: used to check the network connectivity.
−
Traceroute: used to check the network routes.
−
Speed Test: used to check the connection speed between two devices in a same
−
network.
Spectrum Analysis: used to check the nearby wireless noise of each channel, then
−
select a frequency band with less wireless noise for the CPE.
8.2.2
Site Survey
Site survey gives you an insight into the information of nearby wireless signals. According to the
diagnosis result, you can select a less interference channel (used by few devices) for the WiFi
network of the device to improve the transmission efficiency.
Configuration procedure
Step 1 Start a web browser on the computer connected to the CPE, visit 192.168.2.1 and choose
Advanced > Diagnose.
Step 2 Select Site Survey in the Diagnose drop-down list menu.
----End
The diagnosis result will be displayed in a few seconds in the list below the Diagnose box. See the
following figure:
135