Access Control - Tenda O1 User Manual

7.3

Access control

7.3.1
Overview
The Access control function enables you to allow or disallow the wireless devices to access the
wireless network based on their MAC addresses. The device supports the following MAC address
filter rules:
Disallow: It indicates that only the wireless devices with the specified MAC addresses
−
cannot access the wireless networks of the device.
Allow: It indicates that only the wireless devices with the specified MAC addresses can
−
access the wireless networks of the device.
7.3.2
Configure access control
Configuration procedures:
Step 1 Start a web browser on the computer connected to the CPE, visit 192.168.2.1 and choose
Wireless > Access Control.
Step 2 Enable the Access Control function.
Step 3 Select a MAC address filter mode, Disallow or Allow.
Step 4 Enter the MAC addresses and click Add.
If the wireless devices to be controlled are connected to the CPE, click Add online devices to add them
to the access control list quickly.
Step 5 Click Save.
Access Control List
----End
130