Manage Acc Services; Enable Acc Client Users To Archive Video - Avigilon ENVR2 Plus User Manual

Manage ACC Services

On the Server panel use the:
General pane:
l
To...
Shut down all the services before you shut down the device.
Start up all the services after they have been shut down.
Format the storage drive.
Enable or disable LPR Performance Mode. LPR Performance Mode can more than
double the number of LPR frames per second that can be precessed
simultaneously for the ENVR2 Plus Appliance, but limits other analytics. When
enabled, Face Recognition will be disabled.
Network Storage Management pane to enable ACC Client application users to archive video from the
l
ENVR2 Plus Appliance. See
Service and RTP Ports panes to change the UDP and TCP ports used to communicate with the ENVR2
l
Plus Appliance:
In the Service Ports pane, enter the Base value to use for the HTTP, HTTPS, and UDP ports and
l
click Apply. The list of ports is updated.
In the RTP Ports pane, enter the Base value to use for the UDP ports and click Apply. The range
l
of ports available for RTP is updated.
Important: These changes can only take effect after the system restarts. When you are
prompted, allow the system to restart.

Enable ACC Client Users to Archive Video

To allow users of the ACC Client application to archive video from the ENVR2 Plus Appliance:
1. From the navigation bar, open the Server panel.
2. In the Network Storage Management pane, click Enabled.
3. From the Protocol drop down list, select one of the following:
CIFS — Common Internet file system. The network path is typically in this format: //<hostname
l
or IP> / <path>
NFS — Network file system. The network path is typically in this format: <hostname or IP> :
l
<path>
Manage ACC Services
Enable ACC Client Users to Archive Video
Do this...
Click Stop.
Click Start.
Click Reinitialize to
delete all
configuration and
recorded video data.
Click the LPR
Performance Mode
toggle to enable or
disable the feature.
below.
23