Related Manuals for Avigilon 3 Series
Summary of Contents for Avigilon 3 Series
- Page 1 User Guide Avigilon Network Video Recorder Series 3 HD-NVR3-STD-24TB and HD-NVR3-STD-36TB...
- Page 2 (2) is responsible for your use of, or reliance on, the information. Avigilon Corporation shall not be responsible for any losses or damages (including consequential damages) caused by reliance on the information presented herein.
-
Page 3: Table Of Contents
Table of Contents Introduction Before You Start Overview Front View Back View Installation Package Contents Installing the Rack Rails and Cable Management Arm Connecting Cables Installing the Bezel Configuring Windows 10 Activating and Configuring ACC Software Troubleshooting Network Configuration Checking System Health Advanced Features Checking System Health Replacing a Hard Drive Blank... -
Page 4: Introduction
Introduction The Avigilon Network Video Recorder is preloaded with the Avigilon Control Center software and is configured for maximum performance and reliability. The Network Video Recorder can be easily integrated into any existing Avigilon security system, or act as the base of a new site. -
Page 5: Back View
1. Bezel Protects against unauthorized physical access to the hard drives. The bezel must be removed to access the front of the recorder. 2. Power button Controls the power supply to the recorder. 3. Hard drives Provides access to hot-swappable hard drives. There are LED indicators on each hard drive. Some drives may contain an empty hard drive tray. - Page 6 5. Power supply Redundant power supply. Optional secondary power supply is available (HD-NVR3-STD-2NDPS). 6. SD card slot Accepts an SD card. 7. Operating system hard drives Two hot-swappable 2.5 inch hard drives that are loaded with the operating system. Back View...
-
Page 7: Installation
Installation Package Contents Ensure the package contains the following: Avigilon Network Video Recorder Rack sliding rail assembly kit Cable management arm assembly kit Bezel and key Power cable Installing the Rack Rails and Cable Management Arm If the recorder will be kept in a server rack, install the Rack Sliding Rails and the Cable Management Arm provided in the recorder package. -
Page 8: Configuring Windows 10
4. Enter a password and password hint for the user name and click Next. 5. After a minute, choose the ACC version in use at your site. You are logged in to the Windows environment. The Avigilon Control Center Admin Tool automatically starts up. -
Page 9: Activating And Configuring Acc Software
Troubleshooting below. Proceed to activate the license for the Avigilon Control Center software on your Video Appliance. Proceed to activate the license for the AvigilonControl Center software on your Network Video Recorder. Activating and Configuring ACC Software Initial ACC™ System Setup and Workflow Guide... -
Page 10: Advanced Features
Advanced Features Checking System Health The Server Administrator software is pre-installed on the recorder. The software provides information about the recorder’s system operation status, and gives you remote access to the recorder for recovery operations. If one of the LED indicators on the recorder is flashing an error warning, the Server Administrator will display details about the problem. -
Page 11: Replacing A Hard Drive Blank
Replacing a Hard Drive Blank Depending on the recorder model, there may be hard drive blanks at the front of the recorder. You can replace the blanks with hard drives as required. 1. Remove the bezel. a. Unlock the bezel. b. - Page 12 2. Press the release button and slide the blank out of the hard drive slot. 3. Insert the hard drive all the way into the recorder then push the handle against the hard drive to lock it into place. 4. Open the Server Administrator application and expand the System Tree. The new hard drive should be automatically added to the Physical Disks list.
-
Page 13: Replacing Front Or Back Hard Drives
Replacing Front or Back Hard Drives The LED indicator flashes green, then orange and then off if it is about to fail. After it has failed, the status indicator flashes orange four times a second. For more information about all the LED status indicators see Hard Drive RAID Status Indicators on page 13. -
Page 14: Led Indicators
LED Indicators The following tables describe what the LEDs on the recorder indicate. Diagnostic Indicators The diagnostic indicators on the front of the recorder highlight system issues during system startup. Note: The diagnostic indicators only light-up when the recorder is powered. LED Indicator Description Blue —... -
Page 15: Network Link Status Indicators
Link LED is orange The recorder is connected to a network at less than the maximum port speed. Connection Status LED is blinking green The recorder is working with other parts of the Avigilon Control Center software. Network Link Status Indicators... -
Page 16: Hard Drive Raid Status Indicators
Hard Drive RAID Status Indicators Each hard drive has its own set of LED indicators to show its activity and status. Figure 3: (1) Status LED. (2) Activity LED. The Activity LED flashes green when the hard drives are working. The following table describes what the Status LEDs indicate: LED Indicator Description... -
Page 17: Specifications
Specifications System Avigilon Control Center Software Enterprise, Standard and Core Operating System Windows 10 Enterprise 2016 LTSB Hard Disk Drive Configuration Near-line SAS, hot swappable, RAID 6 Mechanical Dimensions (H x W x D) 87.3 mm x 482.4 mm x 716 mm (3.44 in. x 18.99 in. x 28.19 in.) Weight 22.3 kg (49.20 lb) - Page 18 Electromagnetic Immunity EN 55024:2010/CISPR 24:2010 Directives RoHS, Reach (SVHC), WEEE Limited Warranty and Technical Support Avigilon warranty terms for this product are provided at avigilon.com/warranty. Warranty service and technical support can be obtained by contacting Avigilon Technical Support: avigilon.com/contact-us/. Specifications...
Need help?
Do you have a question about the 3 Series and is the answer not in the manual?
Questions and answers