Table of Contents
Advertisement
1. Slide the right end of the bezel against the right hinge of the recorder.
2. Push the left end of the bezel against the recorder until it clicks into place.
3. Use the provided key to lock the bezel.
Logging into Windows for the First Time
After the recorder powers up, Windows automatically starts.
When you are prompted, enter the default administrator username and password:
l
username = Administrator
password = Avigilon
Windows finishes loading and you are immediately prompted to enter the Avigilon Control Center software
license key. For more information, see Licensing the Avigilon Control Center (ACC)™ System below.
By default, the operating system language is English. To change the language, see Changing the System
Language on page 16
Licensing the Avigilon Control Center (ACC)™ System
Before you can configure cameras and monitor live or recorded video, you will need to activate your ACC
software license. The license is provided with the recorder. You will need to purchase a license if you don't
already have one.
After the recorder restarts, the first screen you see is the Avigilon Control Center software license wizard.
Other parts of the ACC system may start while you perform this procedure, but you will not be able to use any of
the features until after license activation is complete.
Logging into Windows for the First Time
4
Advertisement
Table of Contents
