Connecting The Power Cord; Indicator Lights - Sharp AJ-2105 Operation Manual

CONNECTING THE POWER CORD

Insert the power cord into the socket on the rear of the printer.
1
Connect the other end of the power cord to an outlet.
2
Power for the printer is turned on automatically.
Do not connect the printer to other than a local voltage outlet. Plugging the printer
into an incompatible power supply may cause extensive damage.
Be sure that the plug in the outlet is readily accessible to all persons. Power is
present in the product even if the power button is off in order to maintain good
print quality.
To completely shut off the power, first turn off the power using the power button.
Then unplug the power cord, after first ensuring that the carriage has returned to
its home position on the right side of the printer and the green power lamp has
been extinguished.

INDICATOR LIGHTS

When only the green power lamp is lit, the printer is working properly.
When a printer error occurs, a light will indicate what problem has occurred, as explained
below.
......lit ......blinking
Light condition
Paper
Ink Power
For more details on solving a problem, refer to the Troubleshooting section in the Online Manual.
......fast blinking
Problem and Solution
Paper tray is empty, or a paper jam has occurred.
Load more paper or remove the jammed paper and press the
paper button.
No ink, or a print head is not installed.
Change the ink tank, or install a print head.
Front cover is open.
Close the front cover.
The printer is warming up, or receiving data. Please wait.
The carriage is not operating normally, or some errors may
have occurred inside the printer.
......extinguished (lamp is off)
11