Advertisement
15
X2
12 x Long Screw
(H19)
(P12)
Align 1 x Drawer Back (P12) to the assembled drawer. Ensure the pre-drilled holes on
the Drawer Left and Right Panels align with the pre-drilled holes on Drawer Back (P12).
Secure together using 4 x Long Screws (H19), tightening with the Phillips Head Screwdriver.
Repeat this step for the other 2 x drawers.
Using 8 x Short Screws(H5) to connect Right Door(P13) to
Buffet by tightening with a Phillips head screwdriver.
Repeat previous step for Right Door(P13) and Left Door(P12)
(H5)
(H5)
12 x Short Screws
6 x Slide
(H18)
(H5)
(H5)
(H5)
Phillips Head
Screwdriver
Secure 1 x set of the Angled Slides (H18) onto one assembled drawer. Secure using 4 x
Short Screws (H5) tightening with the Phillips
Head Screwdriver. Ensure the wheels on the Slides (H18) are at the back of the drawer.
Repeat this step for the other 2 x drawers.
Page 12
Advertisement
