Table Top (P1) Connector (P2) (P3) Table Top (P1) Connector (P2) Leg (P3) Base (P4) Base (P4) Hardware Pack 1 x Allen Key 4 x Small Bolts 6 x Large Bolts 4 x Small Washers 3 x Large Washers (H5) (H1) (H2) (H3)
Page 5
(H5) (H2) (H4) Note: The concave side is up (P2) 3 x Large Bolts 3 x Large Washers (H2) (H4) 1 x Allen Key (H5) (P3) Secure the Connector (P2) to the Leg (P3) using 3 x Large Bolts (H2) and 3 x Large Washers(H4), tightening using the Allen Key (H5).
Page 6
(H5) (H2) (P4) 3 x Large Bolts 1 x Allen Key (H2) (H5) Lower the Base (P4) onto the Leg (P3) as shown. Ensure the holes on the Base (P4) align with the holes on the Leg (P3) and secure together using 3 x Large Bolts (H2), tightening with the allen key (H5).