Download
Share
Print this page
fantastic furniture ADAPT Manual
  1. Manuals
  2. Brands
  3. fantastic furniture Manuals
  4. Indoor Furnishing
  5. ADAPT
  6. Manual

fantastic furniture ADAPT Manual

File 3 drawer
Hide thumbs

Advertisement

Quick Links

Download this manual
Version 1.0
ADAPT
File 3 Drawer
www.fantasticfurniture.com.au

Advertisement

loading

Related Manuals for fantastic furniture ADAPT

Summary of Contents for fantastic furniture ADAPT

  • Page 1 Version 1.0 ADAPT File 3 Drawer www.fantasticfurniture.com.au...
  • Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...

  • Page 3: Assembly Checklist

    Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.

  • Page 4: What You Need

    What you need Top Panel (P1) to assemble the product Back Panel (P5) DO NOT USE Right Side Panel Addictional Tools Required (P3) Flat head screwdriver; Phillips head screwdriver; Left Side Panel (P2) Bottom Panel (P4) Parts list Box 1: Top Panel (P1); Drawer Back Left Side Panel (P2);...
  • Page 5 Step 1 You will need 3 x CL Runner 3 x CR Runner Tracks (H6) Tracks (H7) 18 x Small Phillips head Screws (H5) screwdriver (P3) (P2) Attach 3 x CL Runner Tracks (H6) to Left Side Panel (P2) with 9 x Small Screws (H5). Attach 3 x CR Runner Tracks (H7) to Right Side Panel (P3) with 9 x Small Screws (H5) as shown.
  • Page 6 Step 3 You will need (P3) 4 x Cam Nuts Dowels (H4) (H1) Flat head screwdriver This is how a cam nut works ..The head of the cam bolt goes into the open mouth of the cam nut. (P2) You then turn the cam nut so it tightens over the bolt.
  • Page 7 Step 5 (P4) You will need 4 x Long Dowels Screws (H14) (H1) Phillips head screwdriver (P2) (P3) Insert 4 x Dowels (H1) into Side Panels (P2, P3). Attach Bottom Panel (P4) to Side Panels (P2, P3) with 4 x Long Screws (H14). Tighten screws using a Phillips head screwdriver.
  • Page 8 Step 7 You will need 4 x Wedges 4 x Screws (H16) (H17) (P5) Phillips head screwdriver Secure Back Panel (P5) in place with 4 x Wedges (H16) using 4 x Screws (H17). Tighten Screws using a Phillips head screwdriver. Step 8 You will need (P6)
  • Page 9 (P9) Step 10 (P7) (P8) Slide Drawer Base (P9) into the grooves of Drawer Sides (P7, P8). Step 11 (P10) You will need Long Phillips head Screws (H14) screwdriver Attach Drawer Back (P10) to Drawer Sides (P7, P8) with 4 x Long Screws (H14), make sure that the groove lines up the whole way around the drawer.
  • Page 10 Step 13 You will need 5 x Cam Bolts Phillips head (P11) (H3) screwdriver Insert 5 x Cam Bolts (H3) into Drawer Front (P11) with a Phillips head screwdriver. Step 14 (P15) (P12) You will need (P13) 5 x Cam Nuts 2 x Small (H4) Dowels...
  • Page 11 (P14) Step 16 You will need (P13) 2 x Small 5 x Long (P15) Dowels (H2) Screws (H14) (P12) 2 x Metal Bars Phillips head (H15) screwdriver Insert 2 x Small Dowels (H2) into Support Rail (P15). Insert one side of 2 x Metal Bars (H15) to the grooves of Drawer Front (P13), Attach Drawer Back (P14) to Drawer Sides (P12, P13) and Support Rail (P15) with 5 x Long Screws (H14), make sure that the groove lines up the whole way around the drawer and another side of Metal bars (H15).

  • Page 12: Job Complete

    Step 19 Put the drawers into the chest as shown. Recommended weight capacity : 80KG. Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. www.fantasticfurniture.com.au PAGE 12...