Summary of Contents for fantastic furniture Anaheim
Page 1
Version 1.0 Anaheim Corner Desk fantasticfurniture.com.au...
Page 2
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture fantasticfurniture.com.au fantasticfurniture.com.au...
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.
Page 7
Step 1 Attach 1 x Leg Frame Rail (P7) to 1 x Leg Frame (P1) with 1 x Bolts (H6), tightening to 70% with the Allen Key (H18). Attach 2 x Leg Frame Tubes (P9) to 1 x Leg Frame (P1) with 2 x Bolts (H8), tightening to 70% with the Allen Key (H18).
Page 8
Step 2 Fix Top Shelf (P30) to the 2 x Leg Frames (P1) with 4 x Bolts (H9), by tightening with the Allen Key (H18). Fix Bottom Shelf (P31) the 2 x Leg Frames (P1) with 4 x Bolts (H9), by tightening with the Allen Key (H18).
Page 9
Step 3 Fix the 2 x Right Desk Rails (P3) onto the Leg Frame Rail (P7) with 2 x Bolts (H7), tightening to 70% with the Allen Key (H18). Insert 2 x Bolts (H14) to the other end of the Right Desk Rails (P3), tightening by rotating clockwise as shown.
Page 10
Step 4 Fix the Left Desk Rail (P4) and Left Desk Rail (P5) to the Leg Frame Rail (P7) with 2 x Bolts (H7), tightening to 70% with the Allen Key (H18). Attach the Left Desk Rail (P4) and Left Desk Rail (P8) to Leg Frame (P2) with 2 x Bolts (H6), tightening to 70% with the Allen Key (H18).
Page 11
Step 5 Slot the bolts on the 2 x Right Desk Rails (P3) through Left Desk Rail (P4). Then attach 2 x Left Support Rails (P6) to the 2 x Right Desk Rails (P3) by rotating the rails as shown. fantasticfurniture.com.au Page 11...
Page 12
Step 6 Fix the 2 x Left Support Rails (P6) to Rails (P5 & P8) with 2 x Bolts (H7), tightening to 70% with the Allen Key (H18). Then fix the 2 x Left Support Rails (P6) to the Leg Frame (P2) with 2 x Bolts (H6), tightening to 70% with the Allen Key (H18).
Page 13
Step 7 Attach the Bracket (P10) to the Leg Frames (P2) with 4 x Bolts (H11), tightening with the Allen Key (H18). Now fully tighten all bolts on the frame. fantasticfurniture.com.au Page 13...
Page 14
Step 8 Insert 10 x Dowels (H17) into Left Desk Top (P11). Insert 8 x Cam Bolts (H15) into Left Desk Top (P11), by tightening with a Phillips Head Screwdriver. fantasticfurniture.com.au Page 14...
Page 15
Step 9 This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. Insert 4 x Cam Nuts (H16) into Panels (P13 & P14). Rotate the Cam Nuts so the arrows point towards the incoming bolts.
Page 16
Step 10 This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. Insert 4 x Cam Nuts (H16) into 2 x Panels (P15). Rotate the Cam Nuts so the arrows point towards in the incoming bolts.
Page 17
Step 11 Insert 8 x Dowels (H17) into Panels (P13, P14 & P15). Secure Panels (P13 & P14) with 4 x Screws (H12), by tightening with a Phillips Head Screwdriver. fantasticfurniture.com.au Page 17...
Page 18
Step 12 Align the Left Desk Bottom (P12) to the Dowels as shown. Attach the Left Desk Bottom (P12) to Panels (P13, P14, P15 & P16) with 10 x Bolts (H5), by tightening with the Allen Key (H18). fantasticfurniture.com.au Page 18...
Page 19
Step 13 With two people, carefully lift the left desk unit on top of the frame and align with the holes on the frame. Attach the left desk unit with 2 x Bolts (H8) and 8 x Bolts (H10), by tightening with the Allen Key (H18) as shown.
Page 20
Step 14 Insert 10 x Dowels (H17) into the Right Desk Top (P17) as shown. Insert 8 x Cam Bolts (H15) into Right Desk Top (P17), by tightening with Phillips Head Screwdriver. fantasticfurniture.com.au Page 20...
Page 21
Step 15 This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. Insert 4 x Cam Nuts (H16) into the Panels (P19 & P20). Rotate the Cam Nuts (H16) so the arrows point towards the incoming bolts.
Page 22
Step 16 This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. Insert 4 x Cam Nuts (H16) into Panels (P21 & P22). Rotate the Cam Nuts (H16) so the arrows point towards in the incoming bolts.
Page 23
Step 17 Insert 8 x Dowels (H17) into Panels (P19, P20, P21 & P22). Secure Panels (P19 & P20) with 4 x Screws (H12), by tightening with a Phillips Head Screwdriver. fantasticfurniture.com.au Page 23...
Page 24
Step 18 Attach 1 x CL Runner Track (H1) to Panel (P21) and 1 x CR Runner Track (H2) to Panel (P22) with 6 x Screws (H13), by tightening with a Phillips Head Screwdriver as shown. fantasticfurniture.com.au Page 24...
Page 25
Step 19 Align the Right Desk Bottom (P18) to the Dowels as shown. Attach the Right Desk Bottom (P18) to Panels (P19, P20, P22 & P23) with 10 x Bolts (H5), by tightening with the Allen Key (H18). fantasticfurniture.com.au Page 25...
Page 26
Step 20 With two people, carefully lift the right desk unit into position, aligning to the holes in the frame. Connect the right desk unit with the left desk unit with 8 x Dowels (H17). Please watch your fingers during this process of connecting the two desk units. fantasticfurniture.com.au Page 26...
Page 27
Step 21 Attach the right desk unit to the frame with 2 x Bolts (H8) and 4 x Bolts (H10), by tightening with the Allen Key (H18) as shown. fantasticfurniture.com.au Page 27...
Page 28
Step 22 Attach the Right Drawer Side (P25), Left Drawer Side (P26) and Drawer Support (P28) to the Drawer Back (P27) with 6 x Screws (H12), by tightening with a Phillips Head Screwdriver as shown. fantasticfurniture.com.au Page 28...
Page 29
Step 23 Slide in the Drawer Base (P29) into the grooves of Panels (P25, P26 & P27). Ensure the Drawer Base (P29) is slotted into the grooves fully. fantasticfurniture.com.au Page 29...
Page 30
Step 24 This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. Insert 5 x Cam Nuts (H16) into the Panels (P25, P26 & P28). Rotate the Cam Nuts (H16) so the arrows point towards the incoming bolts.
Page 31
Step 25 Attach 1 x DL Runner (H3) to the bottom of Left Drawer Side (P25) and 1 x DR Runner (H4) to the bottom of Right Drawer Side (P26) with 6 x Screws (H13) by tightening with the Phillips Head Screwdriver. fantasticfurniture.com.au Page 31...
Page 32
Step 26 Insert the assembled drawer into the corresponding compartment as shown. Ensure the drawers slide easily along the rails. fantasticfurniture.com.au Page 32...