Advertisement
13
12 x Cam Bolts
Phillips Head
(H1)
Screwdriver
Secure 4 x Cam Bolts (H1) to 1 x Drawer Front (P11) by tightening with the
Phillips Head Screwdriver.
Repeat this step for the other 2 x Drawer Doors (P11).
14
12
Attach 1 x Drawer Left Panel (P12) and 1 x Drawer Right Panel (P13) to 1 x Drawer Front (P11)
as shown. Ensure that the sides with the
grooves on the Left and Right Panels (P13,P14) face inwards.
Slide 1 x Drawer Bottom (P15) through the grooves on the Left and
Right Drawer Panels (P13, P14).
Repeat this step for the other 2 x Drawers.
Using 4 x Short Screws(H5) to connect 2 x Hingers(H4) to Right Door(P13)
Adjust the door then tighten all screws with a Phillips Head Screwdriver.
Repeat previous step for Anther Right Door(P13) and Left Door(P12)
(H1)
(H1)
(P11)
(P14)
X3
(P11)
(H1)
(H1)
X2
(P13)
(P15)
Page 11
Advertisement
