Page 1
Version 1.0 Alfa Utility 2 Door fantasticfurniture.com.au...
Page 2
Secure it! Reduce the risk of furniture tip-over accidents ARNIN N UR TH TRAP I ATTACH RI U IN UR ATH. included since di erent surface materials require di erent attachments. Please seek professional advice if you are in doubt of what fixing device to use. Recommended weight capacity: 10kg per Shelf •...
Page 3
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gi t Card! @fantasticfurniture fantasticfurniture.com.au Page 3...
Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identi y and lay out all of the compenents Unless instructed, do not fully tighten screws before you begin assembly.
What you need to assemble the product Door Panel Right Top Panel (P5) (P2) Other tools you need: Phillips head screwdriver; Mallet. Back Panel (P7) Shelf Panel (P4) Parts list 2x Side Panels (P1); Top Panel (P2); Shelf Panel Bottom Panel (P3); (P4) 2x Shelf Panels (P4);...
Page 6
Step 1 You will need 2 x Magnet With Legs Mallet (H2) (P2) (H2) DETAIL A DETAIL A Fix 2x Magnet With Legs (H2) to Top Panel (P2) as per Detail A. Step 2 You will need 4 x Screws 4 x Rectractable 2 x Magnet Phillips head...
Page 7
Step 3 You will need 4 x Pan Head Phillips head 2 x Handles Screws screwdriver (H4) #6 × 16.5 (H5) (P5) (H5) (P6) DETAIL A (H4) DETAIL A Fix 2x Handles (H4) to Door Panel Le t (P5) and Door Panel Right (P6) with 4x Pan Head Screws #6 ×...
Page 8
Step 5 (P7) (P7) (P2) (P7) (P4) (P4) (P3) Slide 3x Back Panels (P7) into grooves of Top Panel (P2), Bottom Panel (P3) and 2x Shelf Panels (P4). Step 6 (H1) You will need (P1) 8 x Long Screws Phillips head (H1) screwdriver (P2)
Page 9
Step 7 DETAIL A You will need 4 x Corner 4 x Screws Phillips head (P7) Blocks M3 × 20 screwdriver (H14) (H15) (P7) (H14) (H15) (P7) DETAIL A Tap 4x Corner Blocks (H14) into corners of Back Panels (P7) with 4x Screws M3 × 20 (H15), sure they are all the way in.
Page 10
Step 9 You will need DETAIL A 16 x Stickers (H7) (H7) (P1) DETAIL A Place 16x Stickers (H7) to cover screws. Step 10 You will need (P2) DETAIL A 1 x Pan Head (P7) 1 x Webbing 1 x Flat Washer Phillips head Screw (H9)
Page 11
Step 11 DETAIL A (P2) DETAIL A Move furniture to its final position, then connect the end of the Webbing (H9) to the wall, ensuring it is firmly attached. Seek advice from a qualified trades person on how to attach this to your specific wall. Screws and wall plugs are not supplied. Please use appropriate fixtures for your wall.