Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Palermo
Summary of Contents for fantastic furniture Palermo
- Page 1 Palermo Lowline 1400mm Walnut...
-
Page 4: Hardware Pack
Top Panel (P1) Top Panel(P1) Bottom Panel(P2) Bottom Panel Right Panel(P3) (P2) Left Panel(P4) M-Left Panel(P5) M-Right Panel(P6) (P13) Middle Shelf(P7) 2 x Support Rails(P8) M-Back Panel(P9) 2 x Back Panels(P10) Left Door(P11) Support Rails (P14) Right Door(P12) 4 x Legs(P13) Rails 2 x Support Rails(P14) (P13) - Page 5 12 x Short Bolts 16 x Washers (H8) (H7) 1 x Allen Key 4 x Long Bolts (H9) (H6) 2 x Felt Pads 4 x Levelling Feet (H10) (H15) Stick 2 x Felt Pads (H15) to the centre of Support Rails (P14) Align and position 4 x Legs (P13) onto the pre-drilled holes on the Bottom Panel (P2).
- Page 6 4 x Cam Bolts 4 x Dowels (H1) (H3) (P5) Phillips Head Screwdriver Insert 2 x Dowels (H3) into M- Right Panel (P6) and secure 2 x Cam Bolts (H1) into M-Right Panel (P6) by tightening with the Phillips Head Screwdriver. Repeat this step for M-Left Panel (P5).
- Page 7 2 x Cam Nuts Phillips Head (H2) Screwdriver Insert 2 x Cam Nuts (H2) into Middle Shelf (P7) as shown.Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Middle Shelf (P7) to M-Left Panel (P5) by tightening the Cam Nuts (H2) with the Phillips Head Screwdriver 4 x Cam Nuts (H2)
- Page 8 Slide M-Back Panel (P9) into the grooves of M-Left Panel (P5) , M-Right Panel (P6) and Bottom Panel (P2) as shown. 4 x Dowels 2 x Cam Nuts (H3) (H2) (P6) Phillips Head Screwdriver (P2) Insert 2 x Dowels (H3) into M-Right Panel (P6) and Support Rail (P8) Insert 2 x Dowels (H3) into Right Panel (P3) and Support Rail (P8) Insert 2 x Cam Nuts (H2) into Right Panel(P3).Rotate the cam nuts so the arrows point towards the incoming cam bolts.
- Page 9 (P10) (P3) (P6) Slide one Back Panel (P10) into the groove of M-Right Panel (P6) and Right Panel (P3) as shown. (P5) 2 x Cam Nuts 4 x Dowels (H2) (H3) (P4) Phillips Head Screwdriver Insert 2 x Dowels (H3) into M-Left Panel (P5) and Support Rail (P8) Insert 2 x Dowels (H3) into Left Panel (P4) and Support Rail (P8) Insert 2 x Cam Nuts (H2) into left Panel (P4).Rotate the cam nuts so the arrows point towards the incoming cam bolts.
- Page 10 (P10) (P5) (P4) Slide another Back Panel (P10) into the groove of M-left Panel (P5) and left Panel (P4) as shown. 8 x Dowels 8 x Cam Bolts (H3) (H1) Phillips Head (P1) Screwdriver Insert 8 x Dowels (H3) into Top Panel (P1). Secure 8 x Cam Bolts (H1) to Table Top (P1) by tightening with the Phillips Head Screwdriver.
- Page 11 (P3) 8 x Cam Nuts (P6) (H2) (P5) (P4) Phillips Head Screwdriver Insert 8 x Cam Nuts (H2) into assembled frame (P3, P4, P5, P6) as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts. With assistance, align and attach Top Panel (P1) to assembled frame (P3, P4, P5, P6) as shown.
- Page 12 16 x Short Screws (H5) Secure the Right Door (P12) to the Right Panel (P3) using 8 x Short Screws (H5), tightening using the Phillips Head Screwdriver. Secure the Left Door (P11) to the Left Panel (P4) using 8 x Short Screws (H5), tightening using the Phillips Head Screwdriver.
- Page 13 HOW TO ADJUST THE DOORS TO MADE THE GAPS EVEN (OPTIONAL) STEP 16.1 STEP 16.2 STEP 16.3 STEP 16.4 Page 13...
- Page 14 12 xShort Screws 12 x Wedges (H5) (H11) Insert 12 x Wedges (H11) into all corners of the back of the assembled unit as shown.Secure Wedges (H11) by tightening 12 x Short Screws (H5) with the Phillips Head Screwdriver. 2 x Long Screws 2 x Washers (H12) (H13)
- Page 15 (H13) 2 x Washers (H13) (H13) With assistance, move the lowline to its final position. Connect the end of the 2 x Wall Straps (H14) to the wall ensuring it is firmly attached and secure. Page 15...