7
Slide M-Back Panel (P9) into the grooves of M-Left Panel (P5)
, M-Right Panel (P6) and Bottom Panel (P2) as shown.
8
4 x Dowels
2 x Cam Nuts
(H3)
(H2)
Phillips Head
Screwdriver
Insert 2 x Dowels (H3) into M-Right Panel (P6) and Support Rail (P8)
Insert 2 x Dowels (H3) into Right Panel (P3) and Support Rail (P8)
Insert 2 x Cam Nuts (H2) into Right Panel(P3).Rotate the cam nuts
so the arrows point towards the incoming cam bolts.
Attach Right Panel (P3) to Bottom Panel (P2) by tightening the Cam
Nuts (H2) with the Phillips Head Screwdriver.
Ensure the grooves on each panel aligns as shown.
(P6)
(P2)
Page 8