Advertisement
9
Slide one Back Panel (P10) into the groove of M-Right Panel (P6)
and Right Panel (P3) as shown.
10
2 x Cam Nuts
4 x Dowels
(H2)
Phillips Head
Screwdriver
Insert 2 x Dowels (H3) into M-Left Panel (P5) and Support Rail (P8)
Insert 2 x Dowels (H3) into Left Panel (P4) and Support Rail (P8)
Insert 2 x Cam Nuts (H2) into left Panel (P4).Rotate the cam nuts so
the arrows point towards the incoming cam bolts.
Attach Left Panel (P4) to Bottom Panel (P2) by tightening the Cam
Nuts (H2) with the Phillips Head Screwdriver.
Ensure the grooves on each panel aligns as shown.
(H3)
(P4)
(P10)
(P3)
(P6)
(P5)
Page 9
Advertisement
