Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Palermo
Summary of Contents for fantastic furniture Palermo
- Page 1 Palermo Buffet 3 Door Walnut...
-
Page 4: Hardware Pack
Top Panel(P1) Bottom Panel(P2) Legs Right Panel(P3) (P14) Left Panel(P4) Middle Panel(P5) Long Support(P6) Short Support(P7) Legs Support Rails Long Shelf(P8) (P14) Legs (P15) (P14) Short Shelf(P9) 2 x Long Back Panels(P10) Short Back Panel(P11) Left Door(P12) 2 x Right Door(P13) 4 x Legs(P14) 2 x Support Rails(P15) Hardware Pack... - Page 5 12 x Short Bolts 16 x Washers (H8) (H7) 1 x Allen Key 4 x Long Bolts (H9) (H6) 2 x Felt Pads 4 x Levelling Feet (H13) (H10) Stick 2 x Felt Pads (H13) to the centre of Support Rails (P15) Align and position 4 x Legs (P14) with the pre-drilled holes on the Bottom Panel (P2).
- Page 6 (P5) (P5) 8 x Dowels 8 x Cam Bolts (H3) (H1) (P4) Phillips Head Screwdriver (P3) Insert 2 x Dowels(H3) into Right Panel(P3) and secure 2 x Cam Bolts(H1) to Right Panel(P3) by tightening with a Phillips Head Screwdriver. Repeat for Left Panel (P4) Insert 2 x Dowels(H3) into Middle Panel(P5) and secure 2 x Cam Bolts(H1) to Middle Panel(P5) by tightening with a Phillips Head Screwdriver, Turn the Middle Panel (P5) over repeat the previous step.
- Page 7 2 x Dowels (H3) Insert 2 x Dowels(H3)into Right Panel(P3) and connect Short Support(P7) to Right Panel(P3). （P7) 2 x Dowels 2 x Cam Nuts (H15) (H2) (P9) Phillips Head Screwdriver (P5) Insert 2 x Dowels(H15) into Middle Panel(P5) Insert 2 x Cam Nuts(H2) into Short Shelf(P9) as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts.
- Page 8 2 x Cam Nuts Phillips Head (H2) Screwdriver (P5) Insert 2 x Cam Nuts(H2) into Long Shelf(P8) as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Long Shelf (P8) to Middle Panel (P5) ensuring the groove on the Long Shelf (P8) is positioned as shown.
- Page 9 With assistane, carefully turn the assembled frame upright. Slide 1 x Long Back Panel (P10) through the grooves on the Left Panel (P4) and Middle Panel (P5) as shown. 6 x Cam Bolts 6 x Dowels (H1) (H3) (P1) Insert 6 x Dowels(H3) into Top Panel(P1) and secure 6 x Cam Bolts(H1) into Top Panel(P1) by tightening with the Phillips Head Screwdriver.
- Page 10 6 x Cam Nuts Phillips Head (H2) Screwdriver Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown.Rotate the cam nuts so the arrows point towards the incoming cam bolts. With assistance, attach the Top Panel (P1) to the assembled frame (P3, P4, P5) as shown.
- Page 11 6 x Cam Nuts Phillips Head (H2) Screwdriver (P4) (P2) (P5) (P3) Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown. Rotate the cam nuts so the arrows point towards the incoming cam bolts. With assistance, attach the Bottom panel (P2) to the assembled frame (P3, P4, P5) as shown.
- Page 12 24 x Short Bolts (H5) With assistance, turn the assembled unit upright. Using 8 x Short Screws (H5), attach 1 x Right Door (P13) to the Right Panel (P3) by tightening with the Phillips Head Screwdriver. Repeating this process, attach the other Right Door (P13) to the Middle Panel (P5). Repeat this process to attach the Left Door (P12) to the Left Panel (P4).
- Page 13 STEP 16.1 STEP 16.2 STEP 16.3 STEP 16.4 Page 13...
- Page 14 12 x Wedges 12 x Short Screws (H11) (H5) Phillips Head Screwdriver Insert 12 x Wedges(H11) into all corners of the back of the assembled unit as shown. Secure the 12 x Wedges (H11) to the assembled unit using 12 x Short Screws (H5), tightening with the Phillips Head Screwdriver.
- Page 15 (H16) 2 x Washers (H16) (H16) With assistance, move the buffet to its final position. Secure the 2 x Wall Straps (H17) to the wall ensuring it is firmly attached and secure. Page 15...