Related Manuals for fantastic furniture Piera
Summary of Contents for fantastic furniture Piera
- Page 1 ,.,, Fantastic Furniture Version 1.0 Piera Two People Desk www.fantasticfurniture.com.au Required CA257 6F0608J00-01...
- Page 2 Secure it! Reduce the risk of furniture tip-over accidents WARNING: ENSURE THE WALL STRAP IS ATTACHED TO AVOID SERIOUS INJURY OR DEATH. To avoid any serious or fatal injury, a wall strap has been provided with this product to prevent toppling. We strongly recommend that this product is permanently fixed to the wall or other suitable surface.
- Page 3 We're thrilled you've chosen Fantastic Furniture to help create a home you'll love Fantastic Furniture Love it? Share it! Fantastic buy! Share how it looks at home for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture -" Fantastic Furniture www.fantasticfurniture.com.au...
-
Page 4: Assembly Checklist
Assembly Checklist Read through the instructions Make sure you have all the required tools. carefully before you begin. Never use power tools unless instructed. Identify and lay out all of the Unless instructed, do not fully tighten components before you begin assembly. screws until the item is fully assembled. -
Page 5: What You Need
What You Need Parts List Carton 1: Top Panel (P1) to assemble the product 2 x Bottom Panels (P2) 4 x Side Panels (P3) Carton 2: 4 x Panels (P4) Other Tools You Need Phillips Head Screwdriver; Hammer Fantastic Furniture www.fantasticfurniture.com.au Page5... -
Page 6: Hardware Pack
Hardware Pack � � � � 16 x Small 16 x 12 x Large 48 x Screws Screws Screws Dowels (H4) (H1) (H 2 ) (H3) ®==== � 8 x Foot 1 x Allen 16 x Cam 16 x Cam Key (HS) Glides Nuts (H6) - Page 7 Step1 You will need 48 x Dowels (H4) Insert 48 x dowels (H4) into the 4 x side panels (P3) and 4 x panels (P4). Step2 You will need � 16 x Cam Bolts (H5) �@ Phillips H ead Screwdriver Secure 16 x cam bolts (H5) into the 4 x side panels (P3), tightening Fantastic with a phillips head screwdriver.
- Page 8 Step3 This is how a cam nut works ... You will need ��� � 8 x Cam Nuts (H6) � The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 9 Step4 This is how a cam nut works ... You will need ��� � 8 x Cam Nuts (H6) � The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 10 Step5 You will need @: mmmmmi> 12 x Large Screws (H3) � Allen Key (H8) Secure the bottom panel (P2) to the 2 x panels (P3) and 2 x side panels (P4) with 6 x large screws (H3), by tightening with the allen key (H8). Fantastic Repeat process for the other frame.
- Page 11 Step6 will need � 16 x Small -------+--Countersunk holes Screws facing up (H1) 8 x Metal Plates (H9) �@ Phillips Head Screwdriver Attach 4 x metal plates (H9) into the 2 x panels (P4) with 8 x small screws (H1), tightening with the screwdriver.
- Page 12 Step7 You will need � 16 x Screws (H2) �@ Phillips Head Screwdriver Two People Required ,..., , Attach 2 x frames into the top panel (P1) with 16 x screws (H2), tightening with the Fantastic screwdriver. Furniture www.fantasticfurniture.com.au Page12...
- Page 13 Steps You will need 8 x Foot Glides (H7) Hammer Secure x 8 foot glides (H7) on the bottom of the assembled frame using a Fantastic hammer. Ensure you leave a 2cm gap from the end of each panel as shown. Furniture www.fantasticfurniture.com.au Page13...
- Page 14 Step9 Two People Required ,..., , Fantastic With assistance, turn the unit upright and move the desk to its final position. Furniture www.fantasticfurniture.com.au Page14...
-
Page 15: Job Complete
Step 10 Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. ,..., , Fantastic Furniture www.fantasticfurniture.com.au Page15...