Advertisement
13
8 x Cam Nuts
(H2)
Phillips Head
Screwdriver
Insert 8 x Cam Nuts (H2) into assembled frame (P3, P4, P5, P6) as shown.
Rotate the cam nuts so
the arrows point towards the incoming cam bolts.
With assistance, align and attach Top Panel (P1) to assembled frame (P3, P4, P5, P6)
as shown. Secure together by tightening the
Cam Nuts (H2) with the Phillips Head Screwdriver.
14
4 x Hinges
8 x Short Screws
(H4)
(H5)
Use 4 x Short Screws (H5) to connect 2 x Hinges (H4) to Right Door (P12) as shown.
Tighten all screws with the Phillips Head Screwdriver.
Repeat this step for Left Door(P11)
(P6)
(P5)
(P4)
(P3)
Page 11
Advertisement
