Advertisement
12 x Short Bolts
16 x Washers
(H8)
(H7)
1 x Allen Key
4 x Long Bolts
(H9)
(H6)
2 x Felt Pads
4 x Levelling Feet
(H10)
(H15)
Stick 2 x Felt Pads (H15) to the centre of
Align and position 4 x Legs (P13) onto the pre-drilled holes on the
Bottom Panel (P2). Align and position the 2 x
between the Legs (P13) as shown ensuring the side with the Felt Pads (H15)
is on the Bottom Panel (P2).Using 3 x Washers (H7) and 3 x Short Bolts (H8),
secure 1 x Leg (P13) to the Bottom Panel (P2), tightening using the Allen Key (H9).
Secure the
using 1 x Washer (H7) and 1 x Long Bolt (H6), tightening using the Allen Key (H9).
Repeat this step for the other 3 x Legs (P13).
8 x Cam Bolts
8 x Dowels
(H1)
(H3)
Phillips Head
Screwdriver
Insert 8 x Dowels (H3) into Bottom Panel (P2) and secure 8 x Cam Bolts (H1)
into
Bottom Panel
H10
P14
P13
P13
Support Rails (P14)
(P2)
(P2) by tightening with the Phillips Head Screwdriver.
P13
H9
H9
H6
H8
H6
H7
H7
H7
H15
H15
P14
Support Rails (P14)
Support Rails
to the Leg (P13) and Bottom Panel (P2)
P13
H9
H8
H7
.
(P14)
Advertisement
