Table of Contents
Advertisement
5
Hitching and unhitching
5.1
Hitching to the tractor
The tractor must always be switched off during
connection and disconnection of the hydraulic
hoses, otherwise the machine's hydraulics may
be damaged.
During the work, the machine may give rise to
upward force in the tractor's hitch device.
Figure 5.1
1. Connect the machine's drawbar to the tractor's hitch
device.
2. Raise and secure the machine's support stand.
3. Connect the hydraulic hoses. Carefully check that the
hoses are connected in pairs to the correct hydraulic
connectors. Carefully wipe the couplings and
connectors. This is a good way to avoid unnecessary
problems and wear in the hydraulic system.
4. Connect the lights.
5. Check that hoses and electrical cables are hanging
freely, even at sharp turns.
903815-en-gb; 23.09.2021
Figure 5.2
6. Retract the depth stopper cable into the tractor cab,
see "8.4 Setting the depth stopper".
5.2
Hydraulic support stand
Figure 5.3
The support stand can be set to two different positions.
There is a stay (A) mounted on the bracket to adjust the
foot at the correct angle when the support stand is
mounted in the lower position.
Hitching and unhitching
A
15
Advertisement
Table of Contents
