Instructions And Adjustments; Hitching The Cultivator - Vaderstad NZ Aggressive NZA 600 Series Original Instructions Manual

3

Instructions and adjustments

NOTE! All basic settings and adjustments must always be made on a level surface with the culti-
vator hitched to the tractor and the wing sections lowered.
3.1

Hitching the cultivator

Figure 3.1
Hitch the harrow to the tractor. Lift and secure the support leg.
Connect the hydraulic hoses. Be very careful that the hydraulic hoses are correctly connected to
the hydraulic couplings on the tractor. The hoses are marked with colours. From mftg. no. 24732
the following markings apply:
NZA 500-600:
! Hoses with yellow markings: Lifting and lowering of the harrow.
! Hoses with blue markings: Wing folding and Crossboard operation. If the harrow is equipped
with draw-bar connectors, these hoses can also be connected to the hydraulic connectors next
to the draw-bar.
! Hoses with white markings: Additional hoses for other following implements.
! Hoses marked red: Adjusting the harrow´s working depth. NOTE! Does not apply to NZA 500
ST.
11.07.2011
ver.2
NZA 500-1000 /T/ST
21