Table of Contents
Advertisement
3
Instructions and adjustments
3.1
Hitching to the tractor and unhitching
Figure 3.1
3.1.1
Hitching to the tractor
Ensure that the tractor tow bar is secured.
Connect the hydraulic hoses. Make sure that the hoses, marked with plastic rings, are connected
in pairs to each twin-operating hydraulic connector on the tractor. Raise the supporting leg.
Figure 3.3
Make sure the hydraulic arms of the tractor do not contact the implement when turning. In some
cases, it may be necessary to disassemble the hydraulic arms.
3.1.2
Unhitching
Lower the roller to the ground. Lower the supporting leg. Always park the implement on a level
and strong surface, and allow it to rest on the roller rings and the supporting leg.
14.04.2014
ver.2
Figure 3.2
RST 330-400
17
Advertisement
Table of Contents
