Flow Volume Units; Flow Time Units - Siemens SITRANS F Instruction Manual

Section 2
Use this menu cell to select
either volumetric or mass flow
rate units .
Use this menu cell to select a
time base for the flow rate
units.
Use this menu cell to select a
range for the flow rate display
screen .
Use this menu cell to select
either volumetric or mass flow
total units .
Use this menu cell to set the
resolution of the totalizer .

2.6.9 FLOW VOLUME UNITS

The [Flow Volume Units] option list allows you to select the rate units the meter uses to report volumetric
or mass flow. If you select mass units, the meter uses the specific gravity parameter (see Application
Class section) to convert volumetric flow to mass flow. The default English Units is [Gallons].
To select a Volumetric or Mass Unit:
To access the [Flow Volume Units] option list press
To move the cursor to the required units press
To store selection press

2.6.10 FLOW TIME UNITS

The [Flow Time Units] option list allows you to select a flow display time base. The system default is
[Minutes]. If this suits the application, press the <Down Arrow> to bypass this menu cell.
To select a Time Unit:
To access the [Time Unit] option list press
To move the cursor to the required time units press
To store the time units press
Siemens 2 Channel [1]
Choose desired Flow rate volume units
Flow Volume Units
Flow Time Units
Flow Display Range
Flow Display Scale
Total Volume Units
Totalizer Scale
Total Resolution
Totalizer Mode
Batch/Sample Total
Reset Totalizer
Flow/Total Units
ENT
ENT
2-41
FLOW1
Gallons <US>
MIN
Autorange
GAL/MIN
Gallons <US>
KGAL
00000x00
NETFLOW
0.000
Yes/No
Use this menu cell to enter a
volume accumulation for the
batching or sampling totalizer
relay trigger.
1010ENFM-3B
Use these menu cells
to set the scaling for the
flow rate and flow total
outputs.
Use this menu cell to
select how the totalizer
accumulates flow.