Table of Contents
Advertisement
BOS1901-KIT
User Guide
6.5
Upgrade Development Kit Firmware
The native BOS1901-KIT board firmware includes an over-USB firmware upgrade mechanism. The
BOS1901-KIT software will upgrade the firmware if needed on next connection with the development
kit.
1) Connect the development kit to a PC using the USB cable.
2) Start the BOS1901-KIT software.
3) Select the development kit communication port into the drop-down field:
4) Click on Connect to port.
5) If an upgrade is needed the BOS1901-KIT software will pop up a dialog:
Click on Yes to proceed and wait for the update process to complete.
6)
7) BOS1901-KIT software will automatically start after the upgrade.
8) All is up-to-date and ready to go.
BT001DDK04.01 – Issue 1
Figure 3: Connection dialog
Figure 4: BOS1901-KIT Firmware upgrade dialog
© All rights reserved 2021 Boréas Technologies Inc
8
Advertisement
Table of Contents
